Fuse Box Diagram Volkswagen Polo (9N; 2002-2009) (2024)

FAQs

Where can I find fuse diagram for my car? ›

To locate the fuse specification chart for your vehicle or to learn how to change a fuse, refer to the "Fuses" section of your Owner's Manual.

Engine fuse boxes are typically situated near the battery. In this vehicle, the battery is on the driver's side, and there is a fuse box right above it with a black plastic cover to protect the fuses. On the passenger side, there is also a battery, and the fuse box is located nearby.

You must visually inspect the fuse to see if it has blown. Household electrical fuses typically look like a cylinder or plug with a glass window in the middle or on top. In that window, you should see a thin metal strip without any breaks or discoloration.

To remove the fuse box lid, put your finger in the notch on the lid, pull it toward you, and take it out of its hinges. The fuses are located in five fuse boxes. The interior fuse boxes are located under the dashboard on the driver's and passenger's side.

In most cases, the main fuse box is situated under the hood, near the battery, while secondary panels can be found in the passenger compartment, often hidden behind a removable panel.

Usually, you will find two fuse boxes in the car. One is located under the hood and the other is found in the dashboard or near the steering wheel.

Fuses do not trip, they blow open by melting a piece of metal. The only way to “reset" a fuse is to replace it.

The most straightforward is to inspect the fuse itself, where the amperage rating is typically noted on or near the top of the fuse. The second is to check the fuse diagram in the vehicle, to understand which fuse type is in each slot.

The first thing to do is find your main fuse box (these days called a consumer unit), which will be in the same place as your electricity meter. They're often in the main hallway of a house, in a purpose-built cupboard.

In most cases, the main fuse box can be located under the dashboard on the driver's side. This is usually where all of the fuses that control major electrical components are stored. There may also be additional fuse boxes located in other areas such as under the hood or in the trunk.

What fuses turn on with ignition? ›

There are two types of fuses that you'll encounter when installing a dashcam: switched fuses and constant fuses. A switched fuse is one that only has power when the ignition is turned on, while a constant fuse always has power.

One possible reason why your car won't start no crank is that the fuse for the ignition switch is blown. You can check the fuse by locating it in the fuse box and inspecting it for any damage or breakage.

The fuses under the hood help protect electrical components such as electric motor and brake functions. To access the fuses under the hood, a number of panels around the storage compartment must be removed.

Most vehicles have two fuse boxes, with one under the hood and the other in the cabin. You can usually find the other fuse box in the dashboard on the driver's side, but some manufacturers also place it below the glove box. If the interior fuse box isn't there, you can try checking the luggage compartment.

Usually, you will find two fuse boxes in the car. One is located under the hood and the other is found in the dashboard or near the steering wheel. The fuse under the hood protects important engine components and accessories like battery, ECU and cooling fan.

The best clue is that it has to be normally within 3 m of where the electrical meter is. So you could be looking on the outside of a property for a big white box. (One of the white boxes could be for the gas meter – this could be obvious because there are copper pipes or a yellow pipe leaving this box.